The 2010 CSSBI Annual Photo Contest
For the 2009 CSSBI Annual Photo Contest, all photos were 
submitted for adjudication by Terri Meyer Boake, B.E.S. B.Arch. M.Arch. LEED AP, a professor at the University of Waterloo’s School of Architecture. The winners and runners-up of the Photo Contest were announced at our Annual CSSBI Member Meeting on June 6, 2010 in Quebec, QC.
The CSSBI Photo Contest covers five sheet steel categories, including Lightweight Steel Cladding, Lightweight Steel Framing, Residential Steel Roofing, Steel Building Products, and Steel Building Systems. New for this year, 4 new categories were added. These new categories are: Under Construction, Unique Project/Application, Sustainability and Best Picture. Professor Boake judged the photos of each category based on the projects’ usage of sheet steel, the relevancy of sheet steel to the project, architectural design and aesthetics, as well as the presentation of any unique features.
The category winners and runners-up are listed below. First place winners each received a $200 gift certificate to The Home Depot and the second place winners received a $100 gift certificate to The Home Depot.
The CSSBI congratulates the winners and runners-up, and thanks all member participants for making this year’s Photo Contest a success. Keep snapping those photos and we’ll see you next year!
Our winners and runners-up:
Lightweight Steel Cladding:
 |
 |
1st place WINNER: Sharon Dooling Member: Agway Metals Inc.
Project: Horse Barn, Ontario
|
2nd place: Tamara Clark Member: Westman Steel Industries
Project: Stobbe BA Gas Station
|
Lightweight Steel Framing:
 |
 |
1st place WINNER: John Rice Member: Bailey Metal Products
Project: Corus Broadcast Centre, Toronto ON |
2nd place: John Rice Member: Bailey Metal
Products
Project: Retirement Home, Newmarket ON |
Residential Steel Roofing:
 |
 |
1st place WINNER: Chris Ripley Member: Butler Buildings (Canada)
|
2nd place: Bob Illman Member: Agway Metals Inc.
|
Steel Building Products:
 |
 |
1st place WINNER: Bill Stubbins Member: Agway Metals Inc.
Project: Church, Mississauga ON
|
2nd place: Robert Azevedo Member: Roll Form Group
Project: Port Corporation, Corner Brook NL
|
Steel Building Systems:
 |
 |
1st place WINNER: Ashleigh Danielsen Member: BEHLEN Industries LP
Project: Dockside Green, Victoria BC
|
2nd place: Butler Buildings (Canada) Member: Butler Buildings (Canada)
Project: Woolwich Memorial Centre, Elmira ON
|
Under Construction:
 |
1st place WINNER: Brian Harburn Member: Roll Form Group
Project: University of Alberta Cooling Plant
|
Unique Project/Application:
 |
1st place WINNER: Steve Wellington Member: Bailey Metal Products
|
Sustainability:
 |
1st place WINNER: Daryl Hall Member: Agway Metals Inc.
Project: Fifth Town Artisan Cheese Co., Picton ON
|
Best Picture:
 |
1st place WINNER: Ashleigh Danielsen Member: BEHLEN Industries LP
Project: Viking Air Limited, Sidney BC
|
Copyright © Canadian Sheet Steel Building Institute. All Rights Reserved.
